Introducing the S7R
The S7R is designed to be compact yet offer a bass extension that borders on the line of requiring a sub for the majority of monitoring situations. Incorporating a 6.5” low frequency driver with a double flared front loaded port design means reduced turbulence and a monitor that is very forgiving of placement to walls. The built in amplification provides a total of 190W RMS to the drivers. Power is split with 120W RMS to the 6.5” LF and 70W RMS to the silk dome tweeter. Attenuation to the input sensitivity along with low and high frequency is available on the rear panel. The operating range is 65 Hz – 20 kHz with a +- 2db tolerance. The With the addition of the SB10R the frequency response can be taken down to 27Hz for those wanting to accurately monitor down to the lowest of usable acoustics frequencies.
Download the specification
TECHNICAL SPECIFICATION
Dimensions: 244(w) x 347(h) x 302(d) mm
Weight: 11.7 kgs
Drivers: Bass cone – 1 x 165 mm (6 ½ ”)
High Frequency soft dome – 1 x 28 mm (1 ⅛”)
Maximum SPL: 107 dB © continuous pink noise @ 1 m (119 dB © per pair
RMS music)
Frequency Response: 65 Hz-22 kHz ± 2 dB
Connector: XLR and ¼ inch Jack combo socket
Impedance: 10k W electronically balanced with RF filters
Wiring:
- Pin 1 ground Sleeve
- Pin 2 hot Tip
- Pin 3 cold Ring
Sensitivity: -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear
Subsonic: -3dB @ 30 Hz, 24dB/oct
Ultrasonic: -3dB @ 75kHz, 4dB/oct
Crossover: 1k19
LF EQ: -2/-4 @ 65 Hz
HF EQ: +/- 2dB @ 10 kHz