Introducing the S7R

 

The S7R is designed to be compact yet offer a bass extension that borders on the line of requiring a sub for the majority of monitoring situations. Incorporating a 6.5” low frequency driver with a double flared front loaded port design means reduced turbulence and a monitor that is very forgiving of placement to walls. The built in amplification provides a total of 190W RMS to the drivers. Power is split with 120W RMS to the 6.5” LF and 70W RMS to the silk dome tweeter. Attenuation to the input sensitivity along with low and high frequency is available on the rear panel. The operating range is 65 Hz – 20 kHz with a +- 2db tolerance. The With the addition of the SB10R the frequency response can be taken down to 27Hz for those wanting to accurately monitor down to the lowest of usable acoustics frequencies.

Download the specification

Technical Drawing

TECHNICAL SPECIFICATION

Dimensions:                 244(w) x 347(h) x 302(d) mm

Weight:                        11.7 kgs

Drivers:                        Bass cone – 1 x 165 mm (6 ½ ”)

High Frequency soft dome – 1 x 28 mm (1 ⅛”)

Maximum SPL:             107 dB © continuous pink noise @ 1 m (119 dB © per pair

RMS music)

Frequency Response:  65 Hz-22 kHz ± 2 dB

Connector:                   XLR and ¼ inch Jack combo socket

Impedance:                 10k W electronically balanced with RF filters

Wiring: 

  • Pin 1 ground Sleeve
  • Pin 2 hot Tip
  • Pin 3 cold Ring

Sensitivity:                   -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear

Subsonic:                     -3dB @ 30 Hz, 24dB/oct

Ultrasonic:                   -3dB @ 75kHz, 4dB/oct

Crossover:                   1k19

LF EQ:                          -2/-4 @ 65 Hz

HF EQ:                         +/- 2dB @ 10 kHz

All Quested Products come with a five year warranty.